MOI+ Design An adjustable 10-gram weight at the extreme trialing edge on the sole of the clubhead that creates an extremely high Moment of Inertia. The E725 hybrids extreme low-rearward CG position, which is 10% lower in this design than previous models, produces an extremely high MOI and a deeper CG position. The position of the backweight helps deliver an optimally located CG, maximizing MOI, and aiding extreme stability and resistance to twisting at impact. Adjustable Rear Weight This adjustable rear weighting features a 10-gram weight at the extreme trailing edge on the sole of the clubhead. The position of the backweight helps deliver an optimally located CG based on the individual player and their swing. Installation of different weights also allow the dialing in of required swing weight at custom lengths. All 725 series weights are swappable from club to club. Nine different individual weights will be available from 5 grams to 28 grams for our latest ever fitting matrix. 360o Ridgeback Technology Tour Edge engineers employed the Ridgeback Titanium brace for the E725 features increased structural properties and 360o perimeter weighting. The 360o Ridgeback wraps around the entire perimeter to frame the entire clubhead. This Ridgeback 360-degree brace acts as a brace for the entire clubhead to produce more power across the entire face, including the extreme perimeters. Adding additional Titanium to the entire perimeter with a thicker ridge at center face allows more support on off-center hits to increase face deflection. 3D Diamond Face New 3D Diamond Face is made up of new three-dimensional shapes of variable thickness located behind the face, bringing the face to life with full depth and height of the Diamond shapes being utilized. 3D Diamond Face coverage removes additional weight from the face and dramatically increases ball speed on off-center hits while also greatly aiding forgiveness strikes to the extreme heel and toe of the clubhead. There are 41 total diamond shapes featured on the 3D Face, comprising of three different 3D thicknesses in an interweaving pattern. The mini-trampolines that make-up 3D Diamond Face create faster ball speeds and an expanded sweet spot, while the reduction in face thickness on the heel and toe adds forgiveness on mishits and dramatically increases ball speed on off-center hits. RyzerSole Technology + Power Channel The RyzerSole on the E725 Hybrid includes a sole rail and added weight that extends from leading edge to trailing edge and a new Power Channel has been incorporated into the 725 designs directly behind the face on the sole of the clubhead. RyzerSole produces a super-low CG for high launching shots with optimized spin rates, decreased turf interaction and maximum ball speed off the face, while the Power Channel creates better weight distribution and increased face flexing and delivers amplified ball speed and less spin, as well as added forgiveness on shots struck lower on the face. Finned Internal Ribbing Upgraded acoustic engineering is achieved through Finned Internal Ribbing strategically placed on the inside of the clubhead. Internally, the finned ribbing bounce sound on the inside of the club head to provide top-shelf sound and feel. Learn More

Player Preferred Shaping, Adjustable Design The ultra-compact profile and deeper face of the 105cc C725 Hybrid were designed with the competitive player in mind with its square-toe design and adjustable hosel. The C725 Hybrid is the most iron-like hybrid on the market, allowing players to take an iron swing with an attack angle that is hitting down on the ball. This versatile hybrid will play from the tee, fairway, rough and around the green. The adjustable hosel allows golfers to adjust the loft +/- 1.5 degrees up or down. With four lofts being offered (17°, 19° & 21°) the 725 delivers a loft range of 15.5 degrees to 22.5 degrees, allowing every possible distance to be covered by the C725 Hybrid line-up. Flight Tuning System This all-new Flight Tuning System features a 10-gram back weight that is easily able to move to the Draw, Neutral or Fade weight ports that have been designed for the 725 Series. The added weight further lowers the CG 8% and lowers the CG 10% over previous iterations on this compact clubhead, pulling down spin rates while adding to launch characteristics. Moving the back weight to the different weight ports allows for a +/- 5-yard heel and toe bias in directional flight. For example, if you were to move the weight to the Fade weight port, your flight would adjust 5 yards right for a right-handed player, and vice versa for the Draw setting. Installation of different weights also allows dialing in of required swing weight at custom lengths. All 725 series weights are swappable from club to club. Nine different individual weights will be available from 5 grams to 28 grams for our largest ever fitting matrix. 3D Diamond Face New 3D Diamond Face is made up of new three-dimensional shapes of variable thickness located behind the face, bringing the face to life with full depth and height of the Diamond shapes being utilized. 3D Diamond Face coverage removes additional weight from the face and dramatically increases ball speed on off-center hits while also greatly aiding forgiveness strikes to the extreme heel and toe of the clubhead. There are 41 total diamond shapes featured on the 3D Face, comprising of three different 3D thicknesses in an interweaving pattern. The mini-trampolines that make-up 3D Diamond Face create faster ball speeds and an expanded sweet spot, while the reduction in face thickness on the heel and toe adds forgiveness on mishits and dramatically increases ball speed on off-center hits. RyzerSole Technology The RyzerSole on the C725 Hybrid includes a sole rail and added weight that extends from leading edge to trailing edge. RyzerSole produces a super-low CG for high launching shots with optimized spin rates, decreased turf interaction and maximum ball speed off the face. Finned Internal Ribbing Upgraded acoustic engineering is achieved through Finned Internal Ribbing strategically placed on the inside of the clubhead. Internally, the finned ribbing bounce sound on the inside of the club head to provide top-shelf sound and feel. Learn More

MOI+ Design An adjustable 10-gram weight at the extreme trialing edge on the sole of the clubhead that creates an extremely high Moment of Inertia. The E725 hybrids extreme low-rearward CG position, which is 10% lower in this design than previous models, produces an extremely high MOI and a deeper CG position. The position of the backweight helps deliver an optimally located CG, maximizing MOI, and aiding extreme stability and resistance to twisting at impact. Adjustable Rear Weight This adjustable rear weighting features a 10-gram weight at the extreme trailing edge on the sole of the clubhead. The position of the backweight helps deliver an optimally located CG based on the individual player and their swing. Installation of different weights also allow the dialing in of required swing weight at custom lengths. All 725 series weights are swappable from club to club. Nine different individual weights will be available from 5 grams to 28 grams for our latest ever fitting matrix. 360o Ridgeback Technology Tour Edge engineers employed the Ridgeback Titanium brace for the E725 features increased structural properties and 360o perimeter weighting. The 360o Ridgeback wraps around the entire perimeter to frame the entire clubhead. This Ridgeback 360-degree brace acts as a brace for the entire clubhead to produce more power across the entire face, including the extreme perimeters. Adding additional Titanium to the entire perimeter with a thicker ridge at center face allows more support on off-center hits to increase face deflection. 3D Diamond Face New 3D Diamond Face is made up of new three-dimensional shapes of variable thickness located behind the face, bringing the face to life with full depth and height of the Diamond shapes being utilized. 3D Diamond Face coverage removes additional weight from the face and dramatically increases ball speed on off-center hits while also greatly aiding forgiveness strikes to the extreme heel and toe of the clubhead. There are 41 total diamond shapes featured on the 3D Face, comprising of three different 3D thicknesses in an interweaving pattern. The mini-trampolines that make-up 3D Diamond Face create faster ball speeds and an expanded sweet spot, while the reduction in face thickness on the heel and toe adds forgiveness on mishits and dramatically increases ball speed on off-center hits. RyzerSole Technology + Power Channel The RyzerSole on the E725 Hybrid includes a sole rail and added weight that extends from leading edge to trailing edge and a new Power Channel has been incorporated into the 725 designs directly behind the face on the sole of the clubhead. RyzerSole produces a super-low CG for high launching shots with optimized spin rates, decreased turf interaction and maximum ball speed off the face, while the Power Channel creates better weight distribution and increased face flexing and delivers amplified ball speed and less spin, as well as added forgiveness on shots struck lower on the face. Finned Internal Ribbing Upgraded acoustic engineering is achieved through Finned Internal Ribbing strategically placed on the inside of the clubhead. Internally, the finned ribbing bounce sound on the inside of the club head to provide top-shelf sound and feel. Learn More

MOI+ Design An adjustable 10-gram weight at the extreme trialing edge on the sole of the clubhead that creates an extremely high Moment of Inertia. The E725 hybrids extreme low-rearward CG position, which is 10% lower in this design than previous models, produces an extremely high MOI and a deeper CG position. The position of the backweight helps deliver an optimally located CG, maximizing MOI, and aiding extreme stability and resistance to twisting at impact. Adjustable Rear Weight This adjustable rear weighting features a 10-gram weight at the extreme trailing edge on the sole of the clubhead. The position of the backweight helps deliver an optimally located CG based on the individual player and their swing. Installation of different weights also allow the dialing in of required swing weight at custom lengths. All 725 series weights are swappable from club to club. Nine different individual weights will be available from 5 grams to 28 grams for our latest ever fitting matrix. 360o Ridgeback Technology Tour Edge engineers employed the Ridgeback Titanium brace for the E725 features increased structural properties and 360o perimeter weighting. The 360o Ridgeback wraps around the entire perimeter to frame the entire clubhead. This Ridgeback 360-degree brace acts as a brace for the entire clubhead to produce more power across the entire face, including the extreme perimeters. Adding additional Titanium to the entire perimeter with a thicker ridge at center face allows more support on off-center hits to increase face deflection. 3D Diamond Face New 3D Diamond Face is made up of new three-dimensional shapes of variable thickness located behind the face, bringing the face to life with full depth and height of the Diamond shapes being utilized. 3D Diamond Face coverage removes additional weight from the face and dramatically increases ball speed on off-center hits while also greatly aiding forgiveness strikes to the extreme heel and toe of the clubhead. There are 41 total diamond shapes featured on the 3D Face, comprising of three different 3D thicknesses in an interweaving pattern. The mini-trampolines that make-up 3D Diamond Face create faster ball speeds and an expanded sweet spot, while the reduction in face thickness on the heel and toe adds forgiveness on mishits and dramatically increases ball speed on off-center hits. RyzerSole Technology + Power Channel The RyzerSole on the E725 Hybrid includes a sole rail and added weight that extends from leading edge to trailing edge and a new Power Channel has been incorporated into the 725 designs directly behind the face on the sole of the clubhead. RyzerSole produces a super-low CG for high launching shots with optimized spin rates, decreased turf interaction and maximum ball speed off the face, while the Power Channel creates better weight distribution and increased face flexing and delivers amplified ball speed and less spin, as well as added forgiveness on shots struck lower on the face. Finned Internal Ribbing Upgraded acoustic engineering is achieved through Finned Internal Ribbing strategically placed on the inside of the clubhead. Internally, the finned ribbing bounce sound on the inside of the club head to provide top-shelf sound and feel. Learn More

The Extreme Game Improvement E524 Hybrid includes the patented Houdini Sole along with a super-shallow face, slice-fighting offset designs and heel weighting for added draw bias. Houdini Sole Technology - The Houdini Sole includes an area of mass concentrated on the trailing edge of the sole of the clubhead, as well as a curved leading edge under the face. This unique and patented design creates more area to put extra mass, allowing Tour Edge engineers to precisely position weight in the head for an ultra-low lower Center of Gravity (7% lower than E523), optimizing launch conditions and improving stability. Ridgeback Technology - TE engineers have brought the Ridgeback Tech concept from Exotics to Hot Launch with the addition of a Ridgeback rail on the crown of the clubhead. The Ridgeback rail provides increased structural properties that help produce more power across the entire face, including the extreme perimeters. The Ridgeback activation is also utilized as a unique alignment aid at address. Diamond Face VFT - Diamond Face VFT technology is a breakthrough in face technology that features 39 different thick and thin diamond shapes or “mini-trampolines” behind the face. Diamond Face VFT produces a hotter face with faster ball speeds and better performance on off-center hits, as well as reduced spin. Heel Weighted Slice-Fighting Offset Design - Offset designs are combined with a heel sole weight to provide the ultimate in slice fighting technology. The offset design of the E524 Hybrid added with a heel sole weight allows the face to square up at impact for straighter ball flight. The strategically placed heel draw-bias weighting of the E Series offset designs are engineered to help golfers avoid the right side of the course and to increase launch. Larger Footprint Hybrid Design with a Super Shallow Face Design - The super-shallow face with an 11% percent larger hitting area in the Hot Launch E hybrids is designed for extreme playability and high-flying launch characteristics. The extremely shallow face with the larger hitting area produces higher launch angles and extreme ease of launch with extreme forgiveness. Ultra-Light Premium Shafts – The E524 Hybrid comes stock with an ultra-light ALDILA ASCENT PL (Performance Light) graphite shaft. What does it do? The ALDILA ASCENT PL provides lightweight performance with faster club head speeds without sacrificing feel. ASCENT PL technology is designed to resist ovaling, keeping the club head in position and creating more center-face contact. ALDILA ASCENT PL is best for golfers seeking lightweight performance and additional speed without sacrificing stability. Available Lofts in Right-Handed: #3/19-degree, #4/22-degree, #5/25-degree and #6/28-degree Stock Shaft: Aldila Ascent PL Series (55-gram A-Flex, 56-gram Regular Flex, 60-gram Stiff Flex) Stock Grip: Men’s Std Lamkin 360 (R, S Flex) • Men’s Midsize Lamkin 360 (A Flex) Learn More

The Extreme Game Improvement E524 Hybrid includes the patented Houdini Sole along with a super-shallow face, slice-fighting offset designs and heel weighting for added draw bias. Houdini Sole Technology - The Houdini Sole includes an area of mass concentrated on the trailing edge of the sole of the clubhead, as well as a curved leading edge under the face. This unique and patented design creates more area to put extra mass, allowing Tour Edge engineers to precisely position weight in the head for an ultra-low lower Center of Gravity (7% lower than E523), optimizing launch conditions and improving stability. Ridgeback Technology - TE engineers have brought the Ridgeback Tech concept from Exotics to Hot Launch with the addition of a Ridgeback rail on the crown of the clubhead. The Ridgeback rail provides increased structural properties that help produce more power across the entire face, including the extreme perimeters. The Ridgeback activation is also utilized as a unique alignment aid at address. Diamond Face VFT - Diamond Face VFT technology is a breakthrough in face technology that features 39 different thick and thin diamond shapes or “mini-trampolines” behind the face. Diamond Face VFT produces a hotter face with faster ball speeds and better performance on off-center hits, as well as reduced spin. Heel Weighted Slice-Fighting Offset Design - Offset designs are combined with a heel sole weight to provide the ultimate in slice fighting technology. The offset design of the E524 Hybrid added with a heel sole weight allows the face to square up at impact for straighter ball flight. The strategically placed heel draw-bias weighting of the E Series offset designs are engineered to help golfers avoid the right side of the course and to increase launch. Larger Footprint Hybrid Design with a Super Shallow Face Design - The super-shallow face with an 11% percent larger hitting area in the Hot Launch E hybrids is designed for extreme playability and high-flying launch characteristics. The extremely shallow face with the larger hitting area produces higher launch angles and extreme ease of launch with extreme forgiveness. Ultra-Light Premium Shafts – The E524 Hybrid comes stock with an ultra-light ALDILA ASCENT PL (Performance Light) graphite shaft. What does it do? The ALDILA ASCENT PL provides lightweight performance with faster club head speeds without sacrificing feel. ASCENT PL technology is designed to resist ovaling, keeping the club head in position and creating more center-face contact. ALDILA ASCENT PL is best for golfers seeking lightweight performance and additional speed without sacrificing stability. Available Lofts in Left-Handed: #3/19-degree, #4/22-degree, #5/25-degree and #6/28-degree Stock Shaft: Aldila Ascent PL Series (55-gram A-Flex, 56-gram Regular Flex, 60-gram Stiff Flex) Stock Grip: Men’s Std Lamkin 360 (R, S Flex) • Men’s Midsize Lamkin 360 (A Flex) • Ladies/Undersize Lamkin Z5 (L Flex) Learn More

The Extreme Game Improvement E524 Hybrid includes the patented Houdini Sole along with a super-shallow face, slice-fighting offset designs and heel weighting for added draw bias. Houdini Sole Technology - The Houdini Sole includes an area of mass concentrated on the trailing edge of the sole of the clubhead, as well as a curved leading edge under the face. This unique and patented design creates more area to put extra mass, allowing Tour Edge engineers to precisely position weight in the head for an ultra-low lower Center of Gravity (7% lower than E523), optimizing launch conditions and improving stability. Ridgeback Technology - TE engineers have brought the Ridgeback Tech concept from Exotics to Hot Launch with the addition of a Ridgeback rail on the crown of the clubhead. The Ridgeback rail provides increased structural properties that help produce more power across the entire face, including the extreme perimeters. The Ridgeback activation is also utilized as a unique alignment aid at address. Diamond Face VFT - Diamond Face VFT technology is a breakthrough in face technology that features 39 different thick and thin diamond shapes or “mini-trampolines” behind the face. Diamond Face VFT produces a hotter face with faster ball speeds and better performance on off-center hits, as well as reduced spin. Heel Weighted Slice-Fighting Offset Design - Offset designs are combined with a heel sole weight to provide the ultimate in slice fighting technology. The offset design of the E524 Hybrid added with a heel sole weight allows the face to square up at impact for straighter ball flight. The strategically placed heel draw-bias weighting of the E Series offset designs are engineered to help golfers avoid the right side of the course and to increase launch. Larger Footprint Hybrid Design with a Super Shallow Face Design - The super-shallow face with an 11% percent larger hitting area in the Hot Launch E hybrids is designed for extreme playability and high-flying launch characteristics. The extremely shallow face with the larger hitting area produces higher launch angles and extreme ease of launch with extreme forgiveness. Ultra-Light Premium Shafts – The E524 Hybrid comes stock with an ultra-light ALDILA ASCENT PL (Performance Light) graphite shaft. What does it do? The ALDILA ASCENT PL provides lightweight performance with faster club head speeds without sacrificing feel. ASCENT PL technology is designed to resist ovaling, keeping the club head in position and creating more center-face contact. ALDILA ASCENT PL is best for golfers seeking lightweight performance and additional speed without sacrificing stability. Available Lofts in Right-Handed: #3/19-degree, #4/22-degree, #5/25-degree and #6/28-degree Stock Shaft: Aldila Ascent PL Series (52-gram L-Flex Stock Grip: Ladies/Undersize Lamkin Z5 (L Flex) Learn More

The Hot Launch C524 Hybrid provides an extremely high Moment of Inertia (MOI) that tightens dispersion and increases overall accuracy in a compact design. This hybrid is for the player seeking optimal launch and spin rates in a minimal offset design, while still enjoying the benefits of extreme playability. Ridgeback Technology - TE engineers have brought the Ridgeback Tech concept from Exotics to Hot Launch with the addition of a Ridgeback rail on the crown of the clubhead. The Ridgeback rail provides increased structural properties that help produce more power across the entire face, including the extreme perimeters. The Ridgeback activation is also utilized as a unique alignment aid at address. MOI-Boosting Rear Sole Weight - A back weight is strategically placed to the extreme rear of the clubhead to place more mass at the extreme trailing edge of the clubhead. The back weight creates an extremely high MOI rating for top in-line stability. This weighting dramatically affects a lower and deeper CG positioning of the club for ease of launch and more forgiveness off the face at impact. Diamond Face VFT - Diamond Face VFT technology is a breakthrough in face technology that features 34 different thick and thin diamond shapes or “mini-trampolines” behind the face. Diamond Face VFT produces a hotter face with faster ball speeds and better performance on off-center hits, as well as reduced spin. RyzerSole Rail Design - The RyzerSole rail design featured on C524 metals that extends from leading edge to trailing edge. The new sole rail design produces a super-low CG for high-launching shots with optimized spin rates, decreased turf interaction and maximum ball speed off the face. The rail design lowered the CG by 22% on the heel and toe compared to the C523, making it easier to achieve greater power and increased forgiveness. New Exotics Player Preferred Shaping - The more compact profile and deeper face of the C524 Hybrid was inspired by the Exotics C722 series and was designed with the competitive player in mind. The C524 Hybrid design sits square and has a more pear-shaped traditional design that players look for at address. This versatile hybrid will play from the tee, fairway, rough and around the green. Ultra-Light Premium Shafts – The C524 Hybrid comes stock with an ultralight ALDILA ASCENT PL (Performance Light) graphite shaft. The ALDILA ASCENT PL provides lightweight performance with faster club head speeds without sacrificing feel. ASCENT PL technology is designed to resist ovaling, keeping the club head in position and creating more center-face contact. ALDILA ASCENT PL is best for golfers seeking lightweight performance and additional speed without sacrificing stability. Available Lofts in Right-Handed: #3/19-degree, #4/22-degree, #5/25-degree and #6/28-degree Stock Shaft: Aldila Ascent PL Series (55-gram A-Flex, 56-gram Regular Flex, 60-gram Stiff Flex) Stock Grip: Men’s Std Lamkin 360 (R, S Flex) • Men’s Midsize Lamkin 360 (A Flex) Learn More

The Hot Launch C524 Hybrid provides an extremely high Moment of Inertia (MOI) that tightens dispersion and increases overall accuracy in a compact design. This hybrid is for the player seeking optimal launch and spin rates in a minimal offset design, while still enjoying the benefits of extreme playability. Ridgeback Technology - TE engineers have brought the Ridgeback Tech concept from Exotics to Hot Launch with the addition of a Ridgeback rail on the crown of the clubhead. The Ridgeback rail provides increased structural properties that help produce more power across the entire face, including the extreme perimeters. The Ridgeback activation is also utilized as a unique alignment aid at address. MOI-Boosting Rear Sole Weight - A back weight is strategically placed to the extreme rear of the clubhead to place more mass at the extreme trailing edge of the clubhead. The back weight creates an extremely high MOI rating for top in-line stability. This weighting dramatically affects a lower and deeper CG positioning of the club for ease of launch and more forgiveness off the face at impact. Diamond Face VFT - Diamond Face VFT technology is a breakthrough in face technology that features 34 different thick and thin diamond shapes or “mini-trampolines” behind the face. Diamond Face VFT produces a hotter face with faster ball speeds and better performance on off-center hits, as well as reduced spin. RyzerSole Rail Design - The RyzerSole rail design featured on C524 metals that extends from leading edge to trailing edge. The new sole rail design produces a super-low CG for high-launching shots with optimized spin rates, decreased turf interaction and maximum ball speed off the face. The rail design lowered the CG by 22% on the heel and toe compared to the C523, making it easier to achieve greater power and increased forgiveness. New Exotics Player Preferred Shaping - The more compact profile and deeper face of the C524 Hybrid was inspired by the Exotics C722 series and was designed with the competitive player in mind. The C524 Hybrid design sits square and has a more pear-shaped traditional design that players look for at address. This versatile hybrid will play from the tee, fairway, rough and around the green. Available Lofts in Right-Handed: #3/19-degree, #4/22-degree, #5/25-degree and #6/28-degree Stock Shaft: Aldila Ascent PL Series (52-gram L-Flex) Stock Grip: Ladies/Undersize Lamkin Z5 (L Flex) Learn More